SIB Access Control
SIB Access Control Stand-Alone Proximity Reader and Keypad
Model NO.K1202
- Indoor use, bubble buttons keypad
- Plastic case
- Full programming from the keypad
- 2000 users, supports Card, PIN, Card + PIN
- Can be used as a stand alone keypad
- Can set standalone access control mode, toggle relay mode, reader mode
- With data transconductance function
- Adjustable Door Output time
- Very low power consumption (30mA)
- Fast operating speed, <20ms with 2000 users
- Lock output current short circuit protection
- Easy to install and program
- Built in buzzer
- Red, Yellow and Green LEDS display the working status
AED 147.00 Inclusive of VAT
Compare3. Installation
Remove the back cover from the keypad using the supplied special screw driver
Drill 2 holes on the wall for the Self tapping screws and I hole for the cable
Put the supplied rubber bungs to into the two holes
Fix the back cover firmly on the wall with 2 Self tapping screws
Thread the cable through the cable hole Attach the keypad to the back cover.
- Wiring
| Colour | Function | Description |
| Pink | BELL_A | Doorbell button one end |
| Pink | BELL_B | Doorbell button to the other end |
| Green | D0 | WG output D0 |
| White | D1 | WG output D1 |
| Yellow | OPEN | Exit button one end(the other end connected GND) |
| Red | 12V+ | 12V + DC Regulated Power Input |
| Black | GND | 12V – DC Regulated Power Input |
| Blue | NO | Relay normally-on end(Connect positive electric lock “-“) |
| Purple | COM | Relay Public end, connect GND |
| Orange | NC | Relay Closed end(connect negative electric lock”-“) |
| Operating Voltage | DC 12V±10% |
| User Capacity | 2000 |
| Card Reading Distance | 3-6 cm |
| Active Current | ＜60mA |
| Idle Current | 25±5 mA |
| Lock Output Load | Max 3A |
| Alarm Output Load | Max 20A |
| Operating Temperature | -45℃～60℃ |
| Operating Humidity | 10%- 90% RH |
| Waterproof | Conforms to IP68 |
| Adjustable Door Relay time | 0 -99 seconds |
| Adjustable Alarm Time | 0- 3 minutes |
| Wiegand Interface | Wiegand 26 bit |
| Wiring Connections | Electric Lock, Exit Button, External Alarm,External reader |
Based on 0 reviews
Be the first to review “SIB Access Control Stand-Alone Proximity Reader and Keypad”
Related products
-
-
SIB Access Control
SIB Touch Digital Keypad Gate Entry Controller T15
Technical parameters
Card Type:EM/MF
Alarm Output Load:≤20A
Working Voltage:DC12—24V
Idle Current:≤30mA
Reading Range:2—5cm
Operating Temperature:-40~60℃
Operating Humidity:10%—90%
Lock Output Load:≤1A
Door Opening Time:0~99s
Short-circuit Protect:≤100us
SKU: n/a
There are no reviews yet.