IP-COM iUAP-AC-LR 802.11ac Dual-Band Long Range Access Point

Add to wishlist
Compare
iUAP-AC-LR
802.11ac Dual-Band Long Range Access Point
  • MU-MIMO for high throughput
  • Up to 1317 Mbps dual-band data rate
  • 24V0.5A Passive PoE or IEEE 802.3at Gigabit PoE Port
  • Wireless coverage up to 200 meters

AED 380.10 Inclusive of VAT

Compare
Product Information
Model iUAP-AC-LR
Category Ceiling
Dimensions 176*176*43.5 mm
Hardware Specifications
Frequency band 2.4 GHz, 5 GHz
Wireless standards IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac
2.4 GHz data rate 1 – 450 Mbps
5 GHz data rate 6 – 867 Mbps
Ethernet port 1*10/100/1000 Base-TX port
Button 1*Reset
LED indicator 1*Power
Max. power consumption 13.5W (Full-load)
Power supply standard IEEE 802.3at & 24V, 0.5A Passive PoE
Antenna gain 3*4 dBi
2.4 GHz Max. output power 29 +/- 1.5 dBm
5 GHz Max. output power 26 +/- 1.5 dBm
802.11b RX sensitivity -94 dBm
2.4 GHz 802.11n (MCS7) RX sensitivity -73 dBm
5 GHz 802.11a RX sensitivity -93 dBm
5 GHz 802.11n (MCS7) RX sensitivity -74 dBm
Software Specification
Operating modes AP, Client+AP
Hide SSID Supported
Max. No. of SSID 2.4 GHz: 8
5 GHz: 4
Max. connected clients 2.4 GHz: 128
5 GHz: 256
WEP Supported
WPA-PSK AES/TKIP
WPA2-PSK AES/TKIP
WPA Supported
WPA2 Supported
Access control MAC address-based
Adjustable power transmit Supported
Frequency analysis Supported
AP isolation Supported
Connected clients control Supported
RSSI threshold Supported
Transmission Power Adjustable by 1 dBm
WMM Supported
VLAN tagging for SSID Supported
LED indicator control Supported
Diagnostics tool Ping, Traceroute
Scheduled reboot Supported
Reboot at specified interval Supported
Management Web UI
System logs Supported
Firmware upgrade Local and AC upgrade
Reboot Local and AC reboot
Reset Local and AC reset
Backup configuration Supported
Restore configuration Supported
Operating Environment
Default login IP address 192.168.0.254
Default user name admin
Default password admin
Operating temperature -10℃ – 45℃
Operating humidity (10% – 90%) RH, non-condensing
Storage temperature -30℃ – 70℃
Storage humidity (10% – 90%) RH, non-condensing
  • The data on the above pages are all from IP-COM’s internal laboratory, obtained in a specific test environment, and the actual use may be slightly different due to individual differences in products, software versions and environments. Please refer to the actual use.
  • The product pictures and screen contents on the above pages are for illustration only. The actual product effects (including but not limited to appearance, color, size) and screen display contents (including but not limited to background, UI, and pictures) may be slightly different. Please refer to The real thing shall prevail.
  • Due to the real-time changes of product batches and production and supply factors, in order to provide accurate product information, specifications, and product characteristics as much as possible, IP-COM may adjust and revise the text descriptions, picture effects, etc. on the above pages in real time, in order to match the actual situation. Product performance, specifications, indexes, parts and other information are matched.
  • If it is necessary to make the above modifications and adjustments, no special notice will be given.
Category:

iUAP-AC-LR    Overview

Compliant with IEEE 802.11ac, iUAP-AC-LR is a gigabit dual-band ceiling access point, offering a concurrent data rate as high as 1317 Mbps. Powered by MU-MIMO technology, a single iUAP-AC-LR can simultaneously communicate with multiple clients, greatly improving throughput and enhancing user experience. The built-in omni-directional antennas optimize signal radiating directions and broaden the wireless coverage of a single AP. iUAP-AC-LR can be powered by PoE sourcing equipment that compliant with IEEE 802.3at. With ceiling installation design and sleek appearance, iUAP-AC-LR simplifies wireless networking for enterprises, hotels and other public indoor spaces.

Gigabit internet connection for ultra-fast experience

Up to 1317 Mbps dual-band data rate and the Gigabit Ethernet port offer you ultra-fast internet connections.

IEEE 802.11ac Wave2 and MU-MIMO

Compliant with IEEE 802.11ac Wave2 and powered by MU-MIMO technology, a single iUAP-AC-LR can communicate with multiple wireless clients at one time, letting you enjoy higher throughput and better experience.

Dual-band for more connected clients

iUAP-AC-LR allows clients supporting either 2.4 GHz or 5 GHz band, or both to connect to it at the same time, tripling the quantity of connected clients of traditional single-band AP.

Built-in omni-directional antennas

Built-in high-gain omni-directional antennas guarantee a broader and stable coverage.

Built-in RF for intelligent optimization

Featuring various anti-interference algorithms, the built-in RF enables iUAP-AC-LR to evenly allocate bandwidth resources for multiple users, filter interference, and optimize data rate, offering you a guaranteed signal strength and reliable wireless experience.

VLAN tagging for SSID

iUAP-AC-LR allows you to set multiple SSIDs and add VLAN tags for SSIDs, thus protecting your network.

Standard PoE sourcing and DC power supply for easy deployment

You can use an IEEE 802.3at-compliant PoE sourcing equipment, or a 24V DC power adapter to power on iUAP-AC-LR.

Centralized management

The ProFi Controller makes it easy to manage and monitor the whole ProFi devices in a real-time manner and cloud services enable a remote and secure access free from the restrictions of device location.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “IP-COM iUAP-AC-LR 802.11ac Dual-Band Long Range Access Point”

There are no reviews yet.

Related products

Message Us on WhatsApp
Call Now Button