| Model composition |
Main Monitor(VL-MV71) x1, Door Station(VL-V522L) x1 |
| Optional Accessories |
Wireless Monitor |
Wireless sub monitors NOT supported. |
| Door Station |
VL-V522L (1 included with VL-SV71) |
| Monitor |
VL-MV71 (1 included with VL-SV71) |
| Maximum Connectable Units |
Door Station |
Up to 2 (1 included with VL-SV71) |
| Monitor |
Up to 3 extension monitors (not including the main monitor) |
| Connectable Devices |
Electric Lock Release Support |
Up to 2 (user supplied) * When connecting 2, an optional doorphone is required. |
| PBX |
Only Panasonic PBX |
| Convenience |
Picture Recording |
Internal memory: Up to 50 visitors/sessions (up to 8 still images per visitor/session) |
| Night Vision |
Yes |
| Touch Panel / Pan & Tilt |
– / – |
| Voice Changer |
Yes |
| Intercom call |
Intercom Call (between main monitor and extension monitor) |
| Monitor |
Power source |
220-240 V AC, 50/60 Hz |
| Power consumption |
Standby: 2.0 W, During operation: 10.5 W |
| Dimensions (H x W x D) |
Approx. 158 x 243 x 29.5 mm (excluding protruding sections) |
| Mass (weight) |
Approx.825g (including mounting bracket & AC cable) |
| Mass (weight) |
* The weight of the AC cable differs depending on the region. |
| Operating environment |
Ambient temperature: Approx. 0 °C to +40 °C, Relative humidity (non-condensing): up to 90 % |
| Display size |
7-inch wide colour / WVGA (800 x 480 pixels) |
| Display language |
English, Arabic |
| Talking method |
Hands-free |
| Installation method |
Wall mount (mounting bracket supplied) |
| External material |
Flame retardant ABS resin |
| Door Station |
Power source |
Power supplied by the main monitor |
| Dimensions (H x W x D) |
Approx. 131 x 99 x 36.5 mm (excluding protruding sections) |
| Mass (weight) |
Approx. 200 g |
| Operating environment |
Ambient temperature: Approx. -15 °C to +55 °C, Relative humidity (non-condensing): up to 90 % |
| Operating environment |
(tested up to -20 °C) |
| Viewing angle |
Horizontally: Approx. 87 degree, Vertically: Approx. 66 degree |
| Installation method |
Surface mount (mounting base supplied) |
| Image sensor/ Camera (pixel) |
CMOS sensor (Approx. 0.3M pixels) |
| Minimum illuminance required |
1 lx (within approx. 50cm from the camera lens) |
| Lighting method |
LED lights, Infrared LEDs |
| IP rating (INGRESS PROTECTION) |
IPX3 *Water resistance is only assured if the doorphone is installed correctly according to the instructions in the Installation Guide, and appropriate water protection measures are taken. |
| External material |
Flame retardant ABS resin |
There are no reviews yet.